Vinç Kumandası

JOYSTICK Crane Control

  • Model: JOYSTICK
  • Power: 12V/24V/48V/110V/220V/380V
  • Button Speed: Single Speed ​​/ Double Speed

Receiver Unit Features

  • Operating Temperature: -45 to +85
  • Plastic Body Structure: ABS
  • Protection Class: IP65
  • Supply Voltage: 12V/24V/48V/110V/220V/380V
  • AC Operating Voltage: 90 AC- 265 AC
  • DC Operating Voltage: 70 VDC- 350 VDC
  • DC Optional: 7+12 VDC- 75 VDC
  • Relay Response Time: 10 ms
  • Relay Max. Current: 5 Amps / 250 Volts 3 Amps/30 Volts
  • Relay Contacts: 5A 250VAC/30VDC
  • Working Frequency (ISM / SBT): 2.400 Ghz-2.483 Ghz
  • Number of Channels: 83
  • Weight: 507 gr
  • Dimensions: 197*128*63 mm

Transmitter Unit Features

  • Operating Temperature: -45 to +85
  • Plastic Body Structure: PP/GFR30
  • Protection Class: IP65
  • Battery: 7.4V Li -Ion
  • Average Battery Consumption: 7.4 VDC/13 mA
  • Battery Low Warning: YES (Red LED)
  • Operating Time with Fully Charged Battery: 220 Hours (2 Batteries)
  • Supply Voltage: 7.4VDC
  • Direct Current Electrical Power: 39 mW
  • Radio Frequency Power:+10 dBm / 10 mW
  • Working Frequency (ISM / SBT):2.400 Ghz-2.483 Ghz
  • Number of Channels:83
  • Channel Spacing:1 Mhz
  • Command Response Time:20 ms
  • Working Distance:100 meters
  • Configurations:3 x 2 Axis or 6 x Single Axis Joystick + 14 Buttons

Remote control systems can be integrated with overhead cranes, portal cranes, monorail cranes and all other systems. As a result, we have sales all over Turkey, both during the initial installation and for the supply of Crane Controls that you are currently using but have broken down. Remote technical support is provided for the connection of these controls.

Cranes are generally suitable for carrying long and wide loads due to their intended use. In order to carry these loads safely, the operator personnel who command the crane must be at a certain distance from the load being carried. Controls connected to the trolley are not suitable for the personnel to move away from the load being carried. At this point, the need for remote control for cranes arises. The operating system of remote controls is realized by mounting the control receiver on the crane's energy control panel and by means of a handpiece (transmitter) connected to the receiver by the operator personnel. In this way, the personnel ensures that the load is transported in a safe and controlled manner.